Dowsil 7096N Silicone Sealant, neutral cure
310ml clear
Item No.
SUSILI7096
DOWSIL™ AS 7096N Sealant Clear is a clear, low modulus silicone adhesive/sealant designed for applications where non-corrosive cure and durable adhesion to a variety of substrates is required. HOW TO USE Substrate preparation All surfaces must be clean and dry. Degrease and wash off any contaminants
Already in basket
Description
DOWSIL™ AS 7096N Sealant Clear is a clear, low modulus silicone adhesive/sealant designed for applications where non-corrosive cure and durable adhesion to a variety of substrates is required.
HOW TO USE
Substrate preparation
All surfaces must be clean and dry.
Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone or methylethyl ketone. Unprimed adhesion may be obtained on many substrates such as glass, metals (e.g. zinc, steel, aluminum) and most common engineering plastics (e.g.
PVC, polyacrylate, polycarbonate). Adhesion may be less successful on some low energy plastics such as polyethylene, polypropylene and PTFE.
However, for maximum adhesion, the use of DOWSIL™ 1200 OS Primer is recommended. After solvent cleaning, a
thin coat of primer is applied by dipping, brushing or spraying. Allow primer to dry for 15 to 90 minutes at room temperature and a relative humidity of 50% or higher.
FEATURES
• One component adhesive/sealant
• Cures at room temperature when exposed to moisture in the air
• Alkoxy cure system
• Non-sag, paste consistency
• Easy to apply
• Excellent unprimed adhesion to many substrates
• Stable and flexible form –50°C to +150°C
BENEFITS
• Non-corrosive to metals
• Low odor
COMPOSITION
• Silicone Adhesive/Sealant
• Contains fungicide
DATA SHEETS
Technical Data Sheet
Safety Data sheet
HOW TO USE
Substrate preparation
All surfaces must be clean and dry.
Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone or methylethyl ketone. Unprimed adhesion may be obtained on many substrates such as glass, metals (e.g. zinc, steel, aluminum) and most common engineering plastics (e.g.
PVC, polyacrylate, polycarbonate). Adhesion may be less successful on some low energy plastics such as polyethylene, polypropylene and PTFE.
However, for maximum adhesion, the use of DOWSIL™ 1200 OS Primer is recommended. After solvent cleaning, a
thin coat of primer is applied by dipping, brushing or spraying. Allow primer to dry for 15 to 90 minutes at room temperature and a relative humidity of 50% or higher.
FEATURES
• One component adhesive/sealant
• Cures at room temperature when exposed to moisture in the air
• Alkoxy cure system
• Non-sag, paste consistency
• Easy to apply
• Excellent unprimed adhesion to many substrates
• Stable and flexible form –50°C to +150°C
BENEFITS
• Non-corrosive to metals
• Low odor
COMPOSITION
• Silicone Adhesive/Sealant
• Contains fungicide
DATA SHEETS
Technical Data Sheet
Safety Data sheet